The DTC
Manoeuvres (17–20)7 min read

Turning the Car Around

Master the three-point turn, turning around using roundabouts, and reversing into side roads. Learn safe positioning and full observation for every technique.

The full guide

Turning the car around safely requires full observation, slow control, and an awareness of other road users. The traditional three-point turn (or turning in the road) involves pulling across to the opposite kerb, reversing back towards your starting kerb, then driving forward again. Choose a wide, quiet road with good visibility in both directions. Check all around before and during each movement. Alternatively, you can use a roundabout to turn around — simply take the full circle and exit the way you came. This is often the safest option. Reversing into a side road on the left is another technique: signal left, pull past the junction, reverse slowly around the corner while checking all around, then drive forward when safe. For each method, the examiner wants to see controlled clutch work, steady steering, and constant observation throughout.

Common faults

  • Not checking blind spots before each movement.
  • Rushing the manoeuvre without full observation.
  • Mounting the kerb during the turn.
  • Choosing a road that is too narrow or busy.
  • Not using the handbrake on a slope.
  • Forgetting to check for traffic after each movement.

What the examiner looks for

  • Full 360-degree observations before and during.
  • Slow, controlled clutch and brake work.
  • Steady steering without rushing.
  • Safe road choice with good visibility.
  • Awareness of other road users throughout.
  • Correct use of signals where needed.

Quick tips

  1. 1Stop fully between each movement and check all around.
  2. 2Use clutch control, not speed, for this manoeuvre.
  3. 3Pick the widest, quietest road available.
  4. 4If you are unsure, use a roundabout — it is easier.
  5. 5Keep the car moving slowly — faster is not better here.

Common questions about turning the car around

When should I use a three-point turn versus a roundabout?
Use a three-point turn on wide, quiet roads with good visibility. A roundabout is safer and easier on busier roads. Both are accepted methods. The examiner may ask you to turn the car around using any safe method.
How many points is a turn in the road allowed to have?
There is no specific number — it is called a 'turn in the road' now, not a three-point turn. You might use three, five, or seven movements depending on the road width and car size. The examiner marks you on control and observation, not the count.
What should I do if another car approaches during the turn?
Stop and assess. If you are mid-manoeuvre, complete the current movement if safe, or wait. If the other car has stopped for you, proceed carefully. Always acknowledge courtesy with a wave or nod. Safety comes before politeness.
Can I fail for mounting the kerb?
Lightly touching the kerb with your tyre and correcting immediately is usually only a minor fault, but mounting or driving onto the kerb is likely a serious fault. Control your speed so you never climb the kerb.
How do I reverse into a side road to turn around?
Signal left, drive past the junction, stop when the rear of your car is just past the junction, select reverse, turn the wheel left, and reverse slowly around the corner. Check all around throughout. Stop at the kerb and drive forward when clear.
Is turning around using private drives or business entrances allowed?
Only if safe and legal. Do not reverse into someone's driveway without permission. Using a side road is preferred. If you must use a business entrance, check it is not gated, blocked, or signed as private. Always choose the safest option.

Ready to put this into practice?

These guides are a great starting point, but nothing replaces working with a DVSA-approved instructor who can give you real-time feedback.

Book driving lessonsAsk a question
All driving guidesBook a lesson
WhatsAppCallBook
Turning the Car Around | The DTC